alt

RC2

Rototilt® RC2 is designed for excavators weighing between 3 and 6.5 tonnes. The design is based on the same concept as for our larger models with an integrated swivel. This means less hose routing and increased flow capacity. Despite its low weight, the RC2 is a powerful alternative with high breakout torque and flow capacity when using hydraulic tools under the tiltrotator.

New features with RC2

With improvements to the technology and design, the RC2 gives you smoother operation and longer service life. Unlike earlier tiltrotator series, ILS central lubrication and the SecureLock™ safety lock are included as standard with the RC2. A built-in sensor monitors locking pressure and increases safety, thus satisfying the requirements of EN474.

Technical specification

Machine weight, min-max 6614 - 14330 lb 3000 - 6500 kg
Weight (from) 375 lb 170 kg
Bucket width, max 47 in 1200 mm
Breakout force, max 11240 lbf 50 kN
Breakout torque, max 31715 ft.lb 43 kNm
Tilt angle (2x) 40 ° 40 °
Rotation speed (1 revolution in) 7.0 s at 7.9 gpm 7.0 s at 7.9 gpm
Working pressure 3626 psi 25 MPa
Rotation torque 2.9 ft.lb 3.9 Nm
Dimension A, Width 12,36 in 314 mm
Dimension B, Installation height total 31,89 in 810 mm
Dimension C, Length 18,43 in 468 mm
Dimension D, Installation height 15,31 in 389 mm

Contact form

I approve Rototilt Group AB processing my personal data according to its personal data policy.

Match with your machine

In Rototilt’s product guide, you can match products with your machine and build your own tiltrotator system, from machine coupler to tiltrotator and tool.