RC8

Rototilt® RC8 is part of RC™ Tiltrotators, and is perfect for your more heavy tasks in areas such as ground or road work. RC8 can handle breakout torques of up to 330 kNm and is optimized for excavators weighing between 23-32 tonnes. Tiltrotators in this series have been designed to improve your driving experience, energy efficiency and precision. With pressure-compensated hydraulics, you can use the tiltrotator’s functions independently of each other for even better precision. In addition, thanks to the RC™ System proportional control system, you can control all the functions in one and the same excavation movement.

You also gain access to Rototilt’s other functions and properties, such as an oil-filled rotor housing cast in a single piece for maximum lubrication, minimal wear and long service life. You get even more benefits when combining it with the optional RC™ Joysticks and QuickChange™, as well as the SecureLock™ safety lock, which is always included as standard.

Imperial SI

Technical specification

Machine weight, min-max	50705 - 70550 lb 23000 - 32000 kg
Weight (from)	1676 lb 760 kg
Bucket width, max	79 in 2000 mm
Breakout force, max	44960 lbf 200 kN
Breakout torque, max	243395 ft.lb 330 kNm
Tilt angle (2x)	40 ° 40 °
Rotation speed (1 revolution in)	8.0 s at 34 gpm 8.0 s at 34 gpm
Working pressure	3626 psi 25 MPa

Recommended hydraulic flow, min	35 gpm 134 l/min
Number of lubrication points	5 5
Rotation torque	8.8 ft.lb 12 Nm
Tilting torque, double-acting cylinders	47720 ft.lb 64700 Nm
Dimension A, Width	37,4 in 950 mm
Dimension B, Installation height total	52,48 in 1333 mm
Dimension C, Length	36,22 in 920 mm
Dimension D, Installation height	26,5 in 673 mm

Download (PDF)

We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.

The advantages of pressure-compensated hydraulics

RC4-RC9 have newly developed pressure-compensated hydraulics. This allows the tiltrotator’s various functions to work independently of each other in order to provide precise control of tilt and rotation, even if you want to operate these at different speeds. This becomes even more clear when you are using both functions at the same time. When the tilt function is operating in the maximum position, rotation can continue at the same speed as before. As a result, tiltrotators in the RC™ series provide you with optimum parallel operation, as you do not need to take the speed of rotation and tilt into account. Your operating experience becomes smoother and your movements more controlled, allowing greater precision and better results in all your tasks in the long run.

Your tiltrotator as a part of Rototilt® QuickChange™

With QuickChange™, you can change hydraulic tools automatically without leaving the cab. When you work with QuickChange™ in both the attachment frame at the top and the quick coupler at the bottom, you can disconnect and connect the tiltrotator or switch between different hydraulic tools quickly, easily and safely, depending on which task you have in front of you. You can also mount your tiltrotator directly on the machine and get QuickChange™ functionality for the quick coupler for rapid hydraulic tool changes. The SecureLock™ safety solution is also always included. With a tiltrotator from the RC series, you can always choose to upgrade to QuickChange™ at a later time.

Match with your machine

In Rototilt’s product guide, you can match products with your machine and build your own tiltrotator system, from machine coupler to tiltrotator and tool.

RC8

Technical specification

The advantages of pressure-compensated hydraulics

Your tiltrotator as a part of Rototilt® QuickChange™

Contact form

Match with your machine

Would you like to know more about Rototilt’s products?

Find a dealer