RC8

Rototilt® RC8 is the perfect tiltrotator for heavier tasks in areas such as ground and road work. RC8 is designed to handle large breakout torques of up to 330 kNm and is optimised for excavators weighing between 23-32 tonnes. All RC™ Tiltrotators have been designed for your operating experience, energy efficiency and versatility. With pressure-compensated hydraulics, you can use the tilt and rotate functions independently of each other to deliver optimum precision. Thanks to the RC™ System proportional control system, you can also control all the functions in one excavation movement.

You also gain access to Rototilt’s other functions and properties, such as an oil-filled rotor housing cast in a single piece for maximum lubrication, minimal wear and long service life. You enjoy even more benefits in combination with the optional RC™ Joysticks and QuickChange™, as well as the SecureLock™ safety lock included as standard.

Technical specification

Machine weight, min-max	23000 - 32000 kg 23000 - 32000 kg
Weight (from)	760 kg 760 kg
Bucket width, max	2000 mm 2000 mm
Breakout force, max	200 kN 200 kN
Breakout torque, max	330 kNm 330 kNm
Tilt angle (2x)	40 ° 40 °
Rotation speed (1 revolution in)	8.0 s at 129 l/min 8.0 s at 129 l/min
Working pressure	25 MPa 25 MPa

Recommended hydraulic flow, min	134 l/min 134 l/min
Number of lubrication points	5 5
Rotation torque	12 Nm 12 Nm
Tilting torque, double-acting cylinders	64700 Nm 64700 Nm
Dimension A, Width	950 mm 950 mm
Dimension B, Installation height total	1333 mm 1333 mm
Dimension C, Length	920 mm 920 mm
Dimension D, Installation height	673 mm 673 mm

Download (PDF)

We reserve the right to change specifications or designs without prior notice, and make reservations for any factual errors. Variations in the product range and equipment standards may occur from market to market. For more information concerning current product specifications, local adaptations and special equipment, please contact your nearest sales office.

The advantages of pressure-compensated hydraulics

RC4-RC9 have newly developed pressure-compensated hydraulics. This allows the tiltrotator’s various functions to work independently of each other in order to provide precise control of tilt and rotation, even if you want to operate these at different speeds. This becomes even clearer when you are using both functions at the same time. When the tilt function is operating in the maximum position, rotation can continue at the same speed as before. As a result, tiltrotators in the RC™ series provide you with optimum parallel operation, as you do not need to take the speed of rotation and tilt into account. Your operating experience becomes smoother and your movements more controlled, allowing greater precision and better results in all your tasks in the long run.

The tiltrotator at the heart of the Rototilt® QuickChange™

The key aspect of Rototilt® QuickChange™ is the ability to switch out hydraulic tools without the need to leave the cab. By working with QuickChange™ on both the top attachment frame, as well as the bottom quick coupler, operators are able to efficiently connect and reconnect with the tiltrotator or go between the various hydraulic tool options. All options are dependent on the task at hand. The tiltrotators can also be mounted directly onto your machine, with the QuickChange™ coupler fitted to the lower part of the tiltrotator. This enables you to rapidly change any of your hydraulic tools. For your safety, the SecureLock™ safety solution is standard and with any RC series tiltrotator, you can upgrade to QuickChange™ when required.

Match with your machine

In Rototilt’s product guide, you can match products with your machine and build your own tiltrotator system, from machine coupler to tiltrotator and tool.

RC8

Technical specification

The advantages of pressure-compensated hydraulics

The tiltrotator at the heart of the Rototilt® QuickChange™

Contact form

Match with your machine

Would you like to know more about Rototilt’s products?

Find a dealer